Scorpion®
14 x 1-1/2-in Hex Head, Fine Thread, #3 Drill Point, Clear Zinc Screws (Bulk)
Item Number: T3HW14112
Scorpion Type T3HW Hex washer head drill point screws are designed for heavy-gauge metal to metal framing applications. Performance range up to 0.220.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | Hex Head |
| Head Type | Hex Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | #3 Drill Point |
| Gauge | 14 |
| Metric Gauge | 6.1 |
| Length | 1 1/2 in. |
| Head Diameter | 0.5 in. |
| Package Type | Bulk |
| Amount | 2000 |
| Threads Per Inch | 14 |
Available in other lengths
Benefits
Scorpion hex head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections.
Recommended Application
For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #10 up to 2,500 RPM, Size #12 up to 1,800 RPM; however, 2,500 RPM may be used provided care is exercised to minimize influence of high heat buildup due to surface speed (see ASTM C1513, Table 5, note C).
- The hex head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.