Scorpion®
6 x 1-1/8 Phillips, Bugle Head, Fine Thread, Streaker® Point, Phosphate Screws (Bulk)
Item Number: SP118
Scorpion Type S/P fine thread screws are designed for attaching gypsum board and other sheathing materials to 18-30 mil (25-20 gauge) metal studs.
Specifications
| Application | Drywall To Light-Gauge Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Bugle Head |
| Thread Type | Fine |
| Coating | Phosphate |
| Point Type | Streaker® Point |
| Gauge | 6 |
| Metric Gauge | 3.5 |
| Length | 1 1/8 in. |
| Head Diameter | 0.325 in. |
| Package Type | Bulk |
| Amount | 10000 |
| Threads Per Inch | 17 |
Also available in
- Bulk SP118
- 5-LB SP118FP
- Pack SP118CP
Available in other lengths
- 1 in. SP100
- 1 1/8 in. SP118
- 1 1/4 in. SP114
- 1 5/8 in. SP158
- 2 in. SP200
- 2 1/4 in. SP214
Benefits
Scorpion fine thread drywall screws comply with ASTM C1002 for attaching gypsum panel products to cold-formed steel.
Recommended Application
Multiple layers of drywall attachment to light gauge steel. Rigid insulation attachment to light gauge steel. Other compatible material attachment to light gauge steel.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #6 - #10 up to 4,000 RPM.
- The Bugle Head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® & Streaker® are registered trademarks of Grabber Construction Products, Inc.