Scorpion®
6 x 7/16-in Phillips, Pan Framing Head, Fine Thread, #3 Drill Point, Phosphate Screws (Bulk)
Item Number: DP716
Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing applications.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Pan Head |
| Thread Type | Fine |
| Coating | Phosphate |
| Point Type | #3 Drill Point |
| Gauge | 6 |
| Metric Gauge | 3.5 |
| Length | 7/16 in. |
| Head Diameter | 0.3 in. |
| Package Type | Bulk |
| Amount | 15000 |
| Threads Per Inch | 20 |
Also available in
- Bulk DP716
- 5-LB DP716FP
- 1-LB DP716PP
- Mini Pack DP716CP
Benefits
Scorpion pan head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections.
Recommended Application
For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
- The Pan Framing Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.