Scorpion®
7 x 1-7/8-in Phillips, Bugle Head, Fine Thread, #3 Drill Point, NanoGard™ Screws (5-LB)
Item Number: DPXT178CP
Scorpion Type DPXT Drill Point exterior fasteners are designed for attaching gypsum board and sheathing to heavy gauge metal studs 33-97 mil (20-12 gauge).
Specifications
| Application | Drywall To Heavy-Gauge Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Bugle Head |
| Thread Type | Fine |
| Coating | NanoGard™ |
| Gauge | 7 |
| Metric Gauge | 3.8 |
| Length | 1 7/8 in. |
| Head Diameter | 0.326 in. |
| Package Type | 5-LB |
| Amount | 500 |
| Threads Per Inch | 19 |
Also available in
- Bulk DPXT178
- 5-LB DPXT178CP
Benefits
- The Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The Bugle Head screws are more evenly heat treated and tempered resulting consistent and reliable performance.
- NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Self-tapping drill point is designed for quick penetration into heavy-gauge metal.
Recommended Application
Drywall or sheathing attachment to steel 33 mil or thicker.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #6 - #10 up to 2,500 RPM.
- The Bugle Head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.