Scorpion®
7 x 2-1/4-in Square Drive, Trim Head, Fine Thread, Drill Point, Clear Zinc Screws (Bulk)
Item Number: DPTR214
Scorpion Type DPTR drill point trim head screws are designed for attaching wood, metal or plastic finish trim to heavy gauge metal (20-12 ga).
Specifications
| Application | Trim to Metal |
|---|---|
| Bit Tip | #1 Square |
| Head Type | Trim Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | Drill Point |
| Gauge | 7 |
| Metric Gauge | 3.8 |
| Length | 2 1/4 in. |
| Head Diameter | 0.246 in. |
| Package Type | Bulk |
| Amount | 3000 |
| Threads Per Inch | 19 |
Also available in
- Bulk DPTR214
- 5-LB DPTR214FP
- 1-LB DPTR214PP
- Pack DPTR214CP
Available in other lengths
- 1 5/8 in. DPTR158
- 2 1/4 in. DPTR214
Benefits
- The #1 square recess is a precision recess designed for secure bit engagement in trim to heavy-gauge metal applications.
- The trim head screws are more evenly heat treated and tempered resulting in consistent and reliable performance.
- Trim head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. This means the screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
Recommended Application
Trim material attachment to steel 33 mil or thicker.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #7 - #8 up to 2,500 RPM.
- The trim head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.