Scorpion®

8 x 1-1/4-in Phillips, Wafer Head, Fine Thread, #3 Drill Point, NanoGard™ Screws (Count Pack)

Name: 8 x 1-1/4-in Phillips, Wafer Head, Fine Thread, #3 Drill Point, NanoGard™ Screws (Count Pack)
Brand: Scorpion®
SKU: INDP114CP

Item Number: INDP114CP

Scorpion Type INDP Indenter drill point cement board fasteners are designed for attaching cement board to 33-97 mil (20-12 gauge) metal. Indenter screws have a large wafer head with countersinking nibs that allows flush seating.

Specifications

Application	Cement Board to Metal
Bit Tip	Phillips
Head Type	Wafer Head
Thread Type	Fine
Coating	NanoGard™
Point Type	Drill Point
Gauge	8
Metric Gauge	4.2
Length	1 1/4 in.
Head Diameter	0.4 in.
Package Type	Pack
Amount	500
Threads Per Inch	18

Also available in

Bulk INDP114
Pack INDP114CP

Available in other lengths

Benefits

The Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
The Wafer Head design provides for a larger load bearing surface and better holding power in cement board to heavy gauge metal applications.
NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
Self-tapping drill point is designed for quick penetration into heavy-gauge metal.

Recommended Application

For attaching cement board to heavy gauge metal 43 mil (18ga) or thicker.

Installation Guidelines

Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with an impact driver. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
The Wafer Head is fully seated when the top of the head is flush with the work surface.
The fastener must penetrate beyond the metal a minimum of three full threads.
Overdriving my result in fastener failure or strip out of the work surface.

Special Features

Underhead nibs