Scorpion®
8 x 2-3/8-in Phillips, Bugle Head, Fine Thread, #3 Drill Point, Clear Zinc Screws (Bulk)
Item Number: DPZ238
Scorpion Type D/P Drill Point fasteners are designed for attaching gypsum board and sheathing to heavy gauge metal studs 33-97 mil (20-12 gauge).
Specifications
| Application | Drywall To Heavy-Gauge Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Bugle Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | #3 Drill Point |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 2 3/8 in. |
| Head Diameter | 0.326 in. |
| Package Type | Bulk |
| Amount | 3000 |
| Threads Per Inch | 18 |
Also available in
- Bulk DPZ238
- Bucket DPZ238PAIL
- 5-LB DPZ238FP
- 1-LB DPZ238PP
- Pack DPZ238CP
Available in other lengths
- 2 3/8 in. DPZ238
- 2 5/8 in. DPZ258
- 3 in. DPZ300
Benefits
Scorpion self-drilling drywall screws comply with ASTM C954 for attaching gypsum panel products to cold-formed steel.
Recommended Application
Drywall or sheathing attachment to steel 33 mil or thicker.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #6 - #10 up to 2,500 RPM.
- The Bugle Head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.