Scorpion®
8 x 2-in Phillips, Modified Truss Head, Fine Thread, Streaker® Point, Clear Zinc Screws (Mini Pack)
Item Number: SPLH200CP
Scorpion Type S/P Modified Truss Head fine-thread screws are designed for attaching wire lathing, framing, and other materials to metal 18-30 mil (25-20 gauge) studs.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Modified Truss Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | Streaker® |
| Gauge | 8 |
| Metric Gauge | 4.2 |
| Length | 2 in. |
| Head Diameter | 0.437 in. |
| Package Type | Pack |
| Amount | 250 |
| Threads Per Inch | 15 |
Available in other lengths
- 9/16 in. SPLH916CP
- 1 1/4 in. SPLH114CP
- 2 in. SPLH200CP
Benefits
- The #2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The modified truss head design provides a larger load bearing surface for better holding power.
- Scorpion® fine thread modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming.
- The extra sharp Streaker® point design starts immediately and is much less likely to flop over.
Recommended Application
Light gauge 18-30 mil (25-20ga) steel framing. K-lath installation.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #8 up to 4,000 RPM.
- The Modified Truss Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion®, & Streaker® are registered trademarks of Grabber Construction Products, Inc.