Scorpion®
10 x 5/8-in Phillips, Low Profile Pan Head, Notched Fine Thread, #3.5 Super-Tek Drill Point, Clear Zinc Screws (Bulk)
Item Number: DPZ058L
Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing applications.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Pan Head |
| Thread Type | Fine |
| Coating | Clear Zinc |
| Point Type | #3.5 Super Tek Drill Point |
| Gauge | 10 |
| Metric Gauge | 4.8 |
| Length | 5/8 in. |
| Head Diameter | 0.3 in. |
| Package Type | Bulk |
| Amount | 8000 |
| Threads Per Inch | 24 |
Also available in
- Bulk DPZ058L
- 5-LB DPZ058LFP
- Mini Pack DPZ058LCP
Available in other lengths
- 5/8 in. DPZ058
- 5/8 in. DPZ058L
- 3/4 in. DPZ0345M
Benefits
Scorpion hex head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections.
Recommended Application
For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
- The Low Profile Pan Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Special Features
Low Profile Pan Head - Sprial notches on thread
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.