Scorpion®
6 x 1-1/4-in Phillips, Bugle Head, Hi-Lo Thread, Streaker® Point, Clear Zinc Screws (Bulk)
Item Number: SSTZ114
Scorpion Type SST super-thread screws are designed for attaching gypsum board to wood or light gauge 18-30 mil (25-20 gauge) steel studs. The special alternating coarse and fine threads increase holding power and reduce strip-outs.
Specifications
| Application | Drywall to Metal or Wood |
|---|---|
| Bit Tip | Phillips |
| Head Type | Bugle Head |
| Thread Type | High-Low Alternating |
| Coating | Clear Zinc |
| Point Type | Streaker® |
| Gauge | 6 |
| Metric Gauge | 3.5 |
| Length | 1 1/4 in. |
| Head Diameter | 0.325 in. |
| Package Type | Bulk |
| Amount | 8000 |
| Threads Per Inch | 18 Hi-Lo |
Also available in
- Bulk SSTZ114
- Pack SSTZ114CP
Available in other lengths
- 1 1/4 in. SSTZ114
- 1 5/8 in. SSTZ158
- 2 in. SSTZ200
Benefits
Scorpion hi-lo thread drywall screws comply with ASTM C1002 for attaching gypsum panel products to cold-formed steel or wood.
Recommended Application
Drywall attachment to light gauge steel or wood.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #6 - #10 up to 4,000 RPM.
- The Bugle Head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
- The fastener must penetrate beyond the metal three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® & Streaker® are registered trademarks of Grabber Construction Products, Inc.