Skip to main content

Scorpion®

6 x 7/16-in Phillips, Low Profile Pan Head, Fine Thread, #3 Drill Point, Phosphate Screws (Bulk)

Item Number: DP716L

Scorpion Type D/P drill point screws are designed for heavy gauge metal to metal framing applications.

Specifications

Application Metal to Metal
Bit Tip Phillips
Head Type Pan Head
Thread Type Fine
Coating Phosphate
Point Type #3 Drill Point
Gauge 6
Metric Gauge 3.5
Length 7/16 in.
Head Diameter 0.3 in.
Package Type Bulk
Amount 10000
Threads Per Inch 20

Also available in

Available in other lengths

Benefits

Scorpion hex head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections.

Recommended Application

For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.

Installation Guidelines

  • Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
  • The Low Profile Pan Head is fully seated when the bearing surface of the head is flush with the work surface.
  • The fastener must penetrate beyond the metal a minimum of three full threads.
  • Overdriving my result in fastener failure or strip out of the work surface.

Special Features

Low Profile Pan Head

Trademark

©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
Scroll to Top