Scorpion®
7 x 7/16-in Phillips, Pan Framing Head, Fine Thread, Streaker® Point, Phosphate Screws (1-LB)
Item Number: SP716PP
Scorpion Type S/P framing screws for 18-30 mil (25-20 gauge) metal framing.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Pan Framing Head |
| Thread Type | Fine |
| Coating | Phosphate |
| Point Type | Streaker® |
| Gauge | 7 |
| Metric Gauge | 3.8 |
| Length | 7/16 in. |
| Head Diameter | 0.305 in. |
| Package Type | 1-LB |
| Amount | 380 |
| Threads Per Inch | 15 |
Also available in
- Bulk SP716
- 5-LB SP716FP
- 1-LB SP716PP
- Pack SP716CP
Benefits
- Scorpion's #2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Under head serrations lock tight in light gauge metal to metal applications.
- The fine thread pan framing head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp twin lead thread screws drive faster and hold better in light gauge metal.
- The extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
Recommended Application
Cold-formed, light gauge steel framing. HVAC and sheet metal.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #6 - #7 up to 4,000 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® & Streaker® are registered trademarks of Grabber Construction Products, Inc.