Scorpion®
7 x 7/16-in Phillips, Pan Framing Head, Fine Thread, Streaker® Point, Phosphate Screws (Bulk)
Item Number: SP716
Scorpion Type S/P framing screws for 18-30 mil (25-20 gauge) metal framing.
Specifications
| Application | Metal to Metal |
|---|---|
| Bit Tip | Phillips |
| Head Type | Pan Framing Head |
| Thread Type | Fine |
| Coating | Phosphate |
| Point Type | Streaker® |
| Gauge | 7 |
| Metric Gauge | 3.8 |
| Length | 7/16 in. |
| Head Diameter | 0.305 in. |
| Package Type | Bulk |
| Amount | 15000 |
| Threads Per Inch | 15 |
Also available in
- Bulk SP716
- 5-LB SP716FP
- 1-LB SP716PP
- Pack SP716CP
Benefits
Scorpion pan head fine thread screws comply with ASTM C1513 for cold-formed steel framing connections.
Recommended Application
Cold-formed, light gauge steel framing. HVAC and sheet metal.
Installation Guidelines
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #6 - #7 up to 4,000 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
Trademark
©2012 GRABBER Construction Products, Inc. Scorpion® & Streaker® are registered trademarks of Grabber Construction Products, Inc.