12 x 2-in #3 Phillips, Flat Head, Fine Thread, Tek 3 Winged Drill Point, Clear Zinc Screws (Bulk)
Item Number: 12200FW3
Attaches sheathing to heavy gauge metal
Attaches sheathing to heavy gauge metal
Specifications
Application:Metal to Metal, Sheathing to Metal
Gauge:12
Bit Tip:#3 Phillips
Head Type:Flat Head
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to heavy gauge metal applications.
- Grabber heavy gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the screw drives eliminating jacking.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM, Size #12 - #14, up to 1,800 RPM..
- The flat head is fully seated when the head is flush with the substrate.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- Attach sheathing to steel 33 mil or thicker.
- Special Wings on the drill point.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Attaches sheathing to heavy gauge metal Specifications
Application:Metal to Metal, Sheathing to MetalGauge:12Bit Tip:#3 PhillipsHead Type:Flat HeadThread Type:Fine ThreadPoint Type:Tek 3 Winged Drill PointCoating:Clear ZincLength:2-inPackage Type:BulkAmount:2000