Grabber | 10 x 3/4-in X-Drive, Revised Flat Pan Head, Fine Thread, Sharp Point, Yellow Zinc Screws (Bulk)

Grabber’s X-Drive™ is a precision recess providing for a consistent, reliable performance and is less likely to wobble or strip-out.
Under head serrations lock tight in light gauge metal to metal applications.
Grabber fine thread pan framing head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp twin lead thread screws drive faster and hold better in light gauge metal.
Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.

Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #10, up to 4,000 RPM.
The head is fully seated when the bearing surface of the of the head is flush with the work surface.
The fastener must penetrate beyond the metal three full thread pitches.
Overdriving may result in failure of the fastener or stripout within the substrate.

Metal to metal applications up to 0.033-in.

Underhead serrations - Comes with 5 dirll bits

All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.

Cold-formed steel light-gauge metal to metal framing up to 0.333-in.

Specifications

Application:Metal to Metal

Bit Tip:X-Drive

Coating:Yellow Zinc

Gauge:10-18

Head Type:Revised Flat Pan Head

Length:3/4-in

Package Type:Bulk

Point Type:Sharp Point

Thread Type:Fine Thread

FastenerAdd-on:5 Bit Tips

Amount:8000