12-24 x 1-1/2-in High Hex Head, Fine Thread, Tek 4 Drill Point Clear Zinc Screws (1-LB)
Item Number: XH1224150H4
There is no description available.
There is no description available.
Specifications
Application:Metal to Metal
Bit Tip:Nut Driver
Coating:Clear Zinc
Gauge:12-24
Head Type:High Hex Head
- High Hex washer head design provides maximum torque and holding power in metal to metal framing applications.
- The high hex washer head design provides a larger load bearing surface for better holding power.
- Grabber drill point high hex washer head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
- Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance RPM range of 0 to 2,500. Because of significantly higher torque output, care and caution should be exercised when using an impact driver, otherwise screw failure or spin out may occur.
Â
- The high hex head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Specifications
Application:Metal to MetalBit Tip:Nut DriverCoating:Clear ZincGauge:12-24Head Type:High Hex HeadLength:1-1/2-inPackage Type:1-LBPoint Type:Tek 4 Drill PointThread Type:Fine Thread