14 x 3-in #3 Phillips, Flat Head, Fine Thread, #4 Winged Pilot Point, GrabberGard® Gray Screws (Bulk)
Item Number: 14300FW4RG
Attaches sheathing to heavy gauge metal
Attaches sheathing to heavy gauge metal
Specifications
Application:Sheathing to Metal
Gauge:14
Bit Tip:#3 Phillips
Head Type:Flat Head
Thread Type:Fine Thread
- Grabber’s Pro-Fit™ #3 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to heavy-gauge metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the screw drives eliminating jacking.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM, Size #12 - #14, up to 1,800 RPM..
- The flat head is fully seated when the head is flush with the substrate.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- Attach sheathing to steel 33 mil or thicker.
- Special Wings on the drill point.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- Attaches sheathing to heavy gauge metal
Specifications
Application:Sheathing to MetalGauge:14Bit Tip:#3 PhillipsHead Type:Flat HeadThread Type:Fine ThreadPoint Type:Tek 4 Winged Drill PointCoating:Clear ZincLength:3-inPackage Type:BulkAmount:1000