7 x 2-1/4-in Phillips, Bugle Head, Hi-Lo Thread, Phosphate Screws (Bulk)
Item Number: 868HL
High-low alternating threads for mixed materials, increased pull-out, and stronger fastening. Sharper threads make driving easier and provide better holding power. Standard bugle head.
High-low alternating threads for mixed materials, increased pull-out, and stronger fastening. Sharper threads make driving easier and provide better holding power. Standard bugle head.
Specifications
Application:Drywall To Light-Gauge Metal or Wood
Gauge:7
Bit Tip:Phillips Bit Tip
Head Type:Bugle Head
Thread Type:Hi-Lo Thread
-
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Head dies are changed more frequently, screws are more evenly heat treated resulting in better formed and stronger heads that resist popping off as screws seat.
- Extra sharp alternating or high-low threads are designed to drive quicker and provide better holding power in drywall to light gauge metal or wood applications.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #6 - #8, up to 4,000 RPM.
- For gypsum board, the bugle head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
- Overdriving may result in failure of the fastener. The fastener must penetrate beyond the metal a minimum of three full threads.
-
- Drywall to light gauge steel or wood.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1002 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- High-low alternating threads for mixed materials, increased pull-out, and stronger fastening. Sharper threads make driving easier and provide better holding power. Standard bugle head.
Specifications
Application:Drywall To Light-Gauge Metal or WoodGauge:7Bit Tip:Phillips Bit TipHead Type:Bugle HeadThread Type:Hi-Lo ThreadCoating:PhosphatePoint Type:23° Streaker® PointLength:2-1/4-inPackage Type:BulkAmount:3000