Application:Drywall to Wood and Wood to Wood
Bit Tip:Phillips Bit Tip
Head Type:Bugle Head
•Grabber’s Pro-Fit™ #2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
•Head dies are changed more frequently, screws are more evenly heat treated resulting in better formed and stronger heads that resist popping off as screws seat.
•Grabber drywall screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. This means the screws will drive faster and will hold better.
•Grabber’s extra sharp 23˚ Grabber® point design starts immediately and is much less likely to flop over.
•Suggested screwgun specification for optimal performance - Size #6 - #10, up to 4,000 RPM.
•For wood, the screw is fully seated when the top of the head is flush with the work surface. For gypsum board, the bugle head is fully seated when the screw is below the surface of the wallboard in accordance with Section 7.2.2 of ASTM C1002.
•Overdriving may result in failure of the fastener or failure of the gypsum board.
- •General interior wood-to-wood construction.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1002 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- Ideal for general purpose interior soft wood to wood applications. Extra sharp point and threads make driving easier and provide better holding power. Standard bugle head.
SpecificationsApplication:Drywall to Wood and Wood to WoodBit Tip:Phillips Bit TipCoating:Yellow ZincGauge:7Head Type:Bugle HeadLength:2-inPackage Type:5 LBPoint Type:23° Grabber® PointThread Type:Coarse ThreadAmount:794