Grabber | 8 x 1-1/4-in Phillips, Modified Truss Head, Fine Thread, Drill Point GrabberGard® Gray Screws (Bulk)

Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
The modified truss head design provides a larger load bearing surface for better holding power.
GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.

Use a standard screwgun with depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #6 - #10, up to 2,500 RPM.
The head is fully seated when the bearing surface of the head is flush with the work surface.
The fastener must penetrate beyond the metal three full thread pitches.
Overdriving may result in failure of the fastener or stripout within the substrate.

Framing steel 33 mil or thicker. K-lath installation in steel substrate.

All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 & C954 requirements. Specific fasteners are listed in ICC ESR-1271: please check the report for listed item numbers. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.

Metal to metal framing or attaches metal lath to 33-68 mil (20-14 ga.) steel studs.

ICC-ES Evaluated
ESR-1271 Report

Specifications

Application:Metal to Metal

Gauge:8

Bit Tip:Phillips Bit Tip

Head Type:Modified Truss Head

Thread Type:Fine Thread

Point Type:Drill Point

Coating:GrabberGard® Gray

Length:1-1/4-in

Package Type:Bulk

Amount:5000