8 x 1-15/16-in #2 Phillips Flat Head, Fine Thread, #3 Pilot Point, Clear Zinc Screws (5-LB)
Item Number: VBP81516F3
Attaches sheathing to heavy gauge metal
Attaches sheathing to heavy gauge metal
Specifications
Application:Sheathing to Metal
Gauge:8
Bit Tip:#2 Phillips
Head Type:Flat Head
Thread Type:Fine Thread
-
-
- Grabber’s Pro-Fit™ #2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to heavy-gauge metal applications.
- Grabber heavy-gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
-
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM, Size #12 - #14, up to 1,800 RPM..
- The flat head is fully seated when the head is flush with the substrate.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- Attach sheathing to steel 33 mil or thicker.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- Attaches sheathing to heavy gauge metal
Specifications
Application:Sheathing to MetalGauge:8Bit Tip:#2 PhillipsHead Type:Flat HeadThread Type:Fine ThreadPoint Type:#3 Pilot PointCoating:Clear ZincLength:1-15/16-inPackage Type:5-lbAmount:650