8 x 1/2-in Phillips, Reduced Modified Truss Head, Fine Thread, Drill Point Clear Zinc Screws (Collated)
Item Number: C34DZ
Attaches heavy gauge 33-97 mil (20-12 ga.) metal to metal.
Attaches heavy gauge 33-97 mil (20-12 ga.) metal to metal.
Specifications
Application:Metal to Metal
Bit Tip:Phillips Bit Tip
Coating:Clear Zinc
Gauge:8
Head Type:Reduced Modified Truss Head
-
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The Reduced Modified Truss Head provides a sufficient load bearing surface for better holding power, but is small enough to fit into tight areas.
- Grabber reduced modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #6 - #10, up to 4,000 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- Overdriving may result in failure of the fastener.
- Cold-formed, heavy gauge steel framing.
- Collated
- Attaches heavy gauge 33-97 mil (20-12 ga.) metal to metal.
Specifications
Application:Metal to MetalBit Tip:Phillips Bit TipCoating:Clear ZincGauge:8Head Type:Reduced Modified Truss HeadLength:1/2-inPackage Type:Box, CollatedPoint Type:Drill PointThread Type:Fine ThreadAmount:2000