8 x 1-3/4-in LOX® 2, Flat Head, Fine Thread, #3 Pilot Point, Clear Zinc Screws (Bulk)
Item Number: M175SDZJBW
Attaches sheathing to heavy gauge metal
Attaches sheathing to heavy gauge metal
Specifications
Application:Plywood to Metal, Sheathing to Metal
Gauge:8
Bit Tip:LOX Bit Tip, LOX® 2
Head Type:Flat Head
- LOX® recess was designed for todays screw guns and for applications where high-torque is required. LOX® will not strip out like most other recesses.
- The flat head design provides better holding power in sheathing to heavy gauge metal applications.
- Grabber heavy gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold bett
- Consistently formed extra sharp pilot point starts and drills easily into heavy gauge metal framing.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM, Size #12 - #14, up to 1,800 RPM..
- The flat head is fully seated when the head is flush with the substrate.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- Attach sheathing to steel 33 mil or thicker.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- Attaches sheathing to heavy gauge metal
Specifications
Application:Plywood to Metal, Sheathing to MetalGauge:8Bit Tip:LOX Bit Tip, LOX® 2Head Type:Flat HeadThread Type:Fine ThreadPoint Type:#3 Pilot Point, Pilot PointCoating:Clear ZincLength:1-3/4-inPackage Type:Box, BulkAmount:4000