8 x 2-3/8-in LOX Drive, Flat Wafer Head, Fine Thread, Winged Drill Point, GrabberGard® Gray Screws (1-LB)
Item Number: XGH8238LG
For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
ICC-ES Evaluated
ESR-4223 Report
For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
ICC-ES Evaluated
ESR-4223 Report
Specifications
Application:Sheathing to Metal
Gauge:8
Bit Tip:LOX® Bit Tip
Head Type:Flat Wafer Head
Thread Type:Fine Thread
- Grabber's LOX® recess provides ultimate torque.
- Thin wafer head design provides for a larger load bearing surface and better holding power in sheathing to heavy gauge metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the fastener drives in.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
- Attach high density sheathing or cement board to steel 33 mil or thicker.
- Winged Drill Point
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
For attaching high density sheathing to heavy gauge cold-formed steel, 33-97 mil (20-12ga).
ICC-ES Evaluated
ESR-4223 ReportSpecifications
Application:Sheathing to MetalGauge:8Bit Tip:LOX® Bit TipHead Type:Flat Wafer HeadThread Type:Fine ThreadPoint Type:Drill PointCoating:GrabberGard® GrayLength:2-3/8-inPackage Type:1-lbAmount:101