8 x 2-3/8-in Phillips, Flat Wafer Head, Hi-Lo Thread, Streaker® Point, GrabberGard® Gray 15 Screws (Bulk)
Item Number: GCB8238HL
Attaches cement board to wood or light gauge metal 10-30 mil (25-20 ga.). Features a .40 diameter head and GrabberGard® exterior coating.
ICC-ES Evaluated
ESR-5616 Report
Attaches cement board to wood or light gauge metal 10-30 mil (25-20 ga.). Features a .40 diameter head and GrabberGard® exterior coating.
ICC-ES Evaluated
ESR-5616 Report
Specifications
Application:Cement Board to Wood or Metal
Gauge:8
Bit Tip:Phillips Bit Tip
Thread Type:Hi-Lo Thread
Head Type:Flat Wafer Head
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- .40-in flat wafer head with nibs provides better holding power in cement board to wood or light gauge metal applications. Special nibs self-countersink as the screw seats.
- GrabberGard® 1500 hour exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Alternating or high-low threads and an extra sharp 23° Streaker® point help Grabber cement board screws start faster and drive easier into wood or light gauge steel.
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 4,000 RPM.
- The head is fully seated when it is flush with the substrate surface.
- For metal applications, the fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving may result in failure of the fastener or stripout with the substrate.
Cement and high density board to wood or light gauge steel. Superior corrosion resistance.
Nibs - Superior corrosion protection
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Attaches cement board to wood or light gauge metal 10-30 mil (25-20 ga.). Features a .40 diameter head and GrabberGard® exterior coating.
ICC-ES Evaluated
ESR-5616 Report
Specifications
Application:Cement Board to Wood or Metal
Gauge:8
Bit Tip:Phillips Bit Tip
Thread Type:Hi-Lo Thread
Head Type:Flat Wafer Head
Point Type:23° Streaker® Point
Coating:GrabberGard® Gray
Length:2-3/8-in
Package Type:Bulk
Amount:3000