8 x 5/8-in Phillips, Modified Truss Head, Fine Thread, Drill Point, Clear Zinc Screws (Bulk)
Item Number: 858SDPC
Metal to metal framing or attaches metal lath to 33-68 mil (20-14 ga.) steel studs.

Metal to metal framing or attaches metal lath to 33-68 mil (20-14 ga.) steel studs.
Specifications
Application:Metal to Metal
Gauge:8
Bit Tip:Phillips Bit Tip
Head Type:Modified Truss Head, Pan Framing Head
Thread Type:Fine Thread
-
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The modified truss head design provides a larger load bearing surface for better holding power.
- Grabber drill point modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
Framing steel 33 mil or thicker. K-lath installation in steel substrate.
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Specifications
Application:Metal to Metal
Gauge:8
Bit Tip:Phillips Bit Tip
Head Type:Modified Truss Head, Pan Framing Head
Thread Type:Fine Thread
Point Type:Drill Point
Coating:Clear Zinc
Length:5/8-in
Package Type:Bulk
Amount:10000