8 x 9/16-in Phillips, Modified Truss Head, Fine Thread, Streaker® Point Clear Zinc Screws (Mini-Pack)
Item Number: BP31Z
Attaches metal lath to wood or to 25-20 ga. steel studs and framing.
Attaches metal lath to wood or to 25-20 ga. steel studs and framing.
Specifications
Application:Metal to Metal
Bit Tip:Phillips Bit Tip
Coating:Clear Zinc
Gauge:8
Head Type:Modified Truss Head
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The modified truss head design provides a larger load bearing surface for better holding power. Under head serrations lock tight in metal to metal applications.
- Grabber fine thread modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming.
- Grabber's extra sharp Streaker® point design starts immediately and is much less likely to flop over.
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #6 - #10, up to 4,000 RPM.
- The Modified Truss Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener or stripout within the substrate.
Light gauge 18-30 mil (25-20ga) steel framing. K-lath installation.
Attaches metal lath to wood or to 25-20 ga. steel studs and framing.
Specifications
Application:Metal to Metal
Bit Tip:Phillips Bit Tip
Coating:Clear Zinc
Gauge:8
Head Type:Modified Truss Head
Length:9/16-in
Package Type:Mini-Pack
Point Type:Streaker® Point
Thread Type:Fine Thread
Amount:50