10-16 x 1-5/8-in Phillips, Flat Head w/ nibs, Fine Thread, Winged Drill Point NanoGard™ Screws (5-LB)
Item Number: T3PF10158S
Scorpion Type T3PF flat head Tek 3 winged drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance. Performance range is 3/8" to 3/4” lumber to 18-12 gauge (43-97 mil) steel.
Scorpion Type T3PF flat head Tek 3 winged drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance. Performance range is 3/8" to 3/4” lumber to 18-12 gauge (43-97 mil) steel.
Specifications
Application:Sheathing to Metal
Gauge:10
Bit Tip:Phillips Bit Tip
Head Type:Flat Head
Thread Type:Fine Thread
- The #2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The flat head design provides better holding power in sheathing to heavy-gauge metal applications.
- NanoGard™ exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing. Special wings clear away sheathing material as the screw drives eliminating jacking.
-
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #10, up to 2,500 RPM.
- The flat head is fully seated when the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving my result in fastener failure or strip out of the work surface.
- For attaching plywood and sheathing to heavy gauge metal.
- Winged drill point - underhead nibs
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type T3PF flat head Tek 3 winged drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. NanoGard™ exterior grade coating improves corrosion resistance. Performance range is 3/8" to 3/4” lumber to 18-12 gauge (43-97 mil) steel.
Specifications
Application:Sheathing to MetalGauge:10Bit Tip:Phillips Bit TipHead Type:Flat HeadThread Type:Fine ThreadPoint Type:Winged Drill PointCoating:NanoGard™Length:1-5/8-inPackage Type:5-lbTPI:16