10 x 1/2-in Phillips, Pan Head, Fine Thread, #3 Drill Point, Clear Zinc Screws (Mini Pack)
Item Number: T3PP10012S
Scorpion Type T3P pan head drill point screws are designed for heavy-gauge metal to metal framing applications.
Scorpion Type T3P pan head drill point screws are designed for heavy-gauge metal to metal framing applications.
Specifications
Application:Metal to Metal
Gauge:10
Bit Tip:5/16 Hex, Phillips Bit Tip
Head Type:Pan Head
Thread Type:Fine Thread
- The Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The Pan Head design provides a larger load bearing surface for better holding power.
- The drill point screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Self-tapping drill point is designed for quick penetration into heavy-gauge metal.
-
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
- The Pan Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type T3P pan head drill point screws are designed for heavy-gauge metal to metal framing applications.
Specifications
Application:Metal to MetalGauge:10Bit Tip:5/16 Hex, Phillips Bit TipHead Type:Pan HeadThread Type:Fine ThreadPoint Type:#3 Drill PointCoating:Clear ZincLength:1/2-inPackage Type:Mini PackTPI:16