10 x 1-7/16-in Phillips, Wafer Head, Fine Thread, #3 Drill Point, Clear Zinc Screws (Bulk)
Item Number: T3PW101716Z
Scorpion Type T3PW Wafer Head drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. Performance range is 1/4" to 3/4" lumber to 43-118 mil (18-10 gauge) steel.
Scorpion Type T3PW Wafer Head drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. Performance range is 1/4" to 3/4" lumber to 43-118 mil (18-10 gauge) steel.
Specifications
Application:Cement Board to Metal
Gauge:10
Bit Tip:Phillips Bit Tip
Thread Type:Fine Thread
Head Type:Wafer Head
- The Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- The Wafer Head design provides for a larger load bearing surface and better holding power in cement board to heavy gauge metal applications.
- Heavy gauge sheathing screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp threads mean screws will drive faster and will hold better.
- Self-tapping drill point is designed for quick penetration into heavy-gauge metal.
-
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with an impact driver. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
- The Wafer Head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- For attaching cement board to heavy gauge metal 43 mil (18ga) or thicker.
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type T3PW Wafer Head drill point screws are designed for attaching plywood and sheathing to heavy gauge metal. Performance range is 1/4" to 3/4" lumber to 43-118 mil (18-10 gauge) steel.
Specifications
Application:Cement Board to MetalGauge:10Bit Tip:Phillips Bit TipThread Type:Fine ThreadHead Type:Wafer HeadPoint Type:Drill PointCoating:Clear ZincLength:1-7/16-inPackage Type:BulkTPI:24Amount:4000