7 x 2-1/4-in Square Drive, Trim Head, Fine Thread, Drill Point, Clear Zinc Screws (5-LB)
Item Number: DPTR214FP
Scorpion Type DPTR drill point trim head screws are designed for attaching wood, metal or plastic finish trim to heavy gauge metal (20-12 ga).
Scorpion Type DPTR drill point trim head screws are designed for attaching wood, metal or plastic finish trim to heavy gauge metal (20-12 ga).
Specifications
Application:Trim to Metal
Gauge:7
Bit Tip:Square Bit Tip
Head Type:Trim Head
Thread Type:Fine Thread
- The #1 square recess is a precision recess designed for secure bit engagement in trim to heavy-gauge metal applications.
- The trim head screws are more evenly heat treated and tempered resulting in consistent and reliable performance.
- Trim head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. This means the screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
-
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #7 - #8 up to 2,500 RPM.
- The trim head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving my result in fastener failure or strip out of the work surface.
- Trim material attachment to steel 33 mil or thicker.
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type DPTR drill point trim head screws are designed for attaching wood, metal or plastic finish trim to heavy gauge metal (20-12 ga).
Specifications
Application:Trim to MetalGauge:7Bit Tip:Square Bit TipHead Type:Trim HeadThread Type:Fine ThreadPoint Type:Drill PointCoating:Clear ZincLength:2-1/4-inPackage Type:5-lbTPI:19Amount:700