8 x 1-1/4-in Phillips, Pan Head, Fine Thread, #2 Drill Point, Clear Zinc Screws (Bulk)
Item Number: T2PP8114
Scorpion Type T2P pan head drill point screws are designed for heavy-gauge metal to metal framing applications.

Scorpion Type T2P pan head drill point screws are designed for heavy-gauge metal to metal framing applications.
Specifications
Application:Metal to Metal
Bit Tip:Phillips Bit Tip
Coating:Clear Zinc
Gauge:8
- Scorpion hex head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections.
-
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 2,500 RPM.
- The Pan Head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type T2P pan head drill point screws are designed for heavy-gauge metal to metal framing applications.
Specifications
Application:Metal to MetalBit Tip:Phillips Bit TipCoating:Clear ZincGauge:8Head Type:Pan HeadLength:1-1/4-inPackage Type:BulkPoint Type:#2 Drill PointThread Type:Fine ThreadTPI:18Amount:5000