8 x 1-in Hex Head, Fine Thread, #2 Drill Point, Clear Zinc Screws (Bulk)
Item Number: T2HW8100
Scorpion Type T2H hex washer head drill point screws are designed for heavy-gauge metal to metal framing applications. Performance range is .035 to .100.
Scorpion Type T2H hex washer head drill point screws are designed for heavy-gauge metal to metal framing applications. Performance range is .035 to .100.
Specifications
Application:Metal to Metal
Gauge:8
Bit Tip:Hex Nut Driver
Head Type:Hex Head
Thread Type:Fine Thread
Scorpion hex head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections.
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #10 up to 2,500 RPM, Size #12 up to 1,800 RPM; however, 2,500 RPM may be used provided care is exercised to minimize influence of high heat buildup due to surface speed (see ASTM C1513, Table 5, note C).
- The hex head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
For heavy gauge steel-to-steel attachment 43 mil (18ga) or thicker.
©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
Scorpion Type T2H hex washer head drill point screws are designed for heavy-gauge metal to metal framing applications. Performance range is .035 to .100.
Specifications
Application:Metal to Metal
Gauge:8
Bit Tip:Hex Nut Driver
Head Type:Hex Head
Thread Type:Fine Thread
Point Type:#2 Drill Point
Coating:Clear Zinc
Length:1-in
Package Type:Bulk
TPI:18
Amount:7500