8 x 3-in Phillips, Bugle Head, Fine Thread, #3 Drill Point, NanoGard™ Screws (Bulk)
Item Number: DPXT300
Scorpion Type DPXT Drill Point exterior fasteners are designed for attaching gypsum board and sheathing to heavy gauge metal studs 33-97 mil (20-12 gauge).
Scorpion Type DPXT Drill Point exterior fasteners are designed for attaching gypsum board and sheathing to heavy gauge metal studs 33-97 mil (20-12 gauge).
Specifications
Application:Drywall To Heavy-Gauge Metal
Gauge:8
Bit Tip:Phillips Bit Tip
Head Type:Bugle Head
- Scorpion hex head self-drilling screws comply with ASTM C1513 for cold-formed steel framing connections. Salt spray tested according to ASTM B117 for 1000 hours; 15 cycles Kesternich per DIN 50018; no red rust. Approved for use in non-coastal areas with all pressure treated lumbers including ACQ.
-
- Use a standard screw gun with a depth-sensitive nose piece and use extra caution when installing with impact drivers. Suggested screw gun specification for optimal performance - Size #6 - #10 up to 2,500 RPM.
- The Bugle Head is fully seated when the top of the head is flush with the work surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- Drywall or sheathing attachment to steel 33 mil or thicker.
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type DPXT Drill Point exterior fasteners are designed for attaching gypsum board and sheathing to heavy gauge metal studs 33-97 mil (20-12 gauge).
Specifications
Application:Drywall To Heavy-Gauge MetalGauge:8Bit Tip:Phillips Bit TipHead Type:Bugle HeadThread Type:Fine ThreadCoating:NanoGard™Point Type:#3 Drill PointLength:3-inPackage Type:BulkTPI:18Amount:2000