Driving wood-to-wood screws and deck screws can be a lot of work and a challenge especially when driving into harder materials. Anyone who has used wood screws has had experience with strip-outs, popped heads and screws that don’t seat flush. Grabber developed the new UltraPro™ screws to help take the hassle out of driving screws so you can concentrate on the job.
The reasons why UltraPro™ is the best wood screw you will ever use:
- LOX® Recess precision fit means the bit will stay engaged.
- QuickGrab™ point for easier start.
- Type 17 point for faster penetration into most hardwoods.
- UltraCut™ threads for easier installation and a stronger hold.
- Draw-tite™ upper threads to eliminate gaps.
- Scavenger® II self-countersinking spiral head for a smooth, flush finish.
- Yellow Zinc finish for interior applications.
To learn more and see the Ultimate Wood-To-Wood Screw in action visit the UltraPro Product Landing Page.
Specifications
Application:Wood to Wood
Bit Tip:LOX® Bit Tip
Coating:Yellow Zinc
Gauge:10
Head Type:Flat Scavenger® II
-
- LOX® recess was designed for today's screw guns and for applications where high-torque is required. LOX® will not strip out like most other recesses.
- The flat head design provides better holding power in wood to wood applications. The unique Scavenger® II spiral head design self-countersinks even into most hard woods.
- Grabber wood screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. This means the screws will drive faster and will hold better.
- The QuickGrab™ Type 17 point starts immediately and drives into most common wood species without needing to pre-drill.
-
Use a standard screwgun with a depth-sensitive nose piece, drill or impact driver. Suggested screwgun specification for optimal performance – Sizes #6 - #10, up to 4,000 RPM.
- The flat head is fully seated when the head is flush with the work surface.
- Overdriving may result in failure of the fastener.
- Interior wood construction, remodeling, and renovation. Wood-to-wood connection.
-
- Scavenger® II Head
- Lox® Recess
- Draw-Tite™ upper threads
- Ultracut™ threads
- Quick Grab™, Type 17 Point
-
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc. Driving wood-to-wood screws and deck screws can be a lot of work and a challenge especially when driving into harder materials. Anyone who has used wood screws has had experience with strip-outs, popped heads and screws that don’t seat flush. Grabber developed the new UltraPro™ screws to help take the hassle out of driving screws so you can concentrate on the job.
The reasons why UltraPro™ is the best wood screw you will ever use:- LOX® Recess precision fit means the bit will stay engaged.
- QuickGrab™ point for easier start.
- Type 17 point for faster penetration into most hardwoods.
- UltraCut™ threads for easier installation and a stronger hold.
- Draw-tite™ upper threads to eliminate gaps.
- Scavenger® II self-countersinking spiral head for a smooth, flush finish.
- Yellow Zinc finish for interior applications.
To learn more and see the Ultimate Wood-To-Wood Screw in action visit the UltraPro Product Landing Page.
Specifications
Application:Wood to WoodBit Tip:LOX® Bit TipCoating:Yellow ZincGauge:10Head Type:Flat Scavenger® IILength:3-1/2-inPackage Type:1 LBPoint Type:QuickGrab™ PointProduct Family:UltraPro™Thread Type:Ultracut™