10 x 3/4-in LOX Drive, Flat Pan Head, Fine Thread, Streaker® Point Yellow Zinc Screws (Collated)
Item Number: CFP101875SLYZ
Cold-formed steel light-gauge metal to metal framing up to 0.333-in.
Cold-formed steel light-gauge metal to metal framing up to 0.333-in.
Specifications
Application:Metal to Metal
Bit Tip:LOX® Bit Tip
Coating:Yellow Zinc
Gauge:10
Head Type:Flat Pan Head
- Grabber's LOX® recess provides ultimate torque.
- Under head serrations lock tight in light gauge metal to metal applications.
- Grabber fine thread pan framing head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. Extra sharp twin lead thread screws drive faster and hold better in light gauge metal.
- Grabber’s extra sharp 23˚ Streaker® point design starts immediately and is much less likely to flop over.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #7 - #10, up to 4,000 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- Overdriving may result in failure of the fastener or failure of the gypsum board.
- Cold-formed, light gauge steel framing. HVAC and sheet metal.
- Serrations Under Head - Collated
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- Cold-formed steel light-gauge metal to metal framing up to 0.333-in.
Specifications
Application:Metal to MetalBit Tip:LOX® Bit TipCoating:Yellow ZincGauge:10Head Type:Flat Pan HeadLength:3/4-inPackage Type:Box, CollatedPoint Type:Streaker® PointThread Type:Fine ThreadAmount:1000