10 x 1-1/4-in Square Drive, Wafer Head, Hi-Lo Thread Screws (Bulk)
Item Number: BBSP114
Scorpion Type BBSP wafer head hi-low thread screws are designed for attaching cement board and high density backer board to wood or light gauge (25-20 ga) metal. Countersinking nibs and wafer head seat flush.
Scorpion Type BBSP wafer head hi-low thread screws are designed for attaching cement board and high density backer board to wood or light gauge (25-20 ga) metal. Countersinking nibs and wafer head seat flush.
Specifications
Application:Cement Board to Metal or Wood
Bit Tip:Square Bit Tip
Thread Type:Hi-Lo Thread
Head Type:Wafer Head
- Scorpion screws comply with ASTM C1513 for self-drilling fasteners for cold-formed steel. Salt spray tested according to ASTM B117 for 1000 hours; 15 cycles Kesternich per DIN 50018; no red rust. Approved for use in non-coastal areas with all pressure treated lumbers including ACQ.
-
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - Size #8 - #10 up to 4,000 RPM.
- The wafer head is fully seated when the top of the head is flush with the substrate surface.
- The fastener must penetrate beyond the metal a minimum of three full threads.
- Overdriving my result in fastener failure or strip out of the work surface.
- Cement board attachment to light gauge steel or wood.
- Self-countersinking nibs
- ©2012 GRABBER Construction Products, Inc. Scorpion® is a registered trademark of Grabber Construction Products, Inc.
- Scorpion Type BBSP wafer head hi-low thread screws are designed for attaching cement board and high density backer board to wood or light gauge (25-20 ga) metal. Countersinking nibs and wafer head seat flush.
Specifications
Application:Cement Board to Metal or WoodBit Tip:Square Bit TipThread Type:Hi-Lo ThreadHead Type:Wafer HeadPoint Type:Spoon PointGauge:10Coating:NanoGard™Length:1-1/4-inPackage Type:BulkTPI:14 Hi-LoAmount:3500