10 x 3/4-in X-Drive, Reduced Modified Truss Head, Fine Thread, Drill Point, GrabberGard® Gray Screws (Bulk)
Item Number: FP101875XDG
For framing steel 33 mil or thicker.
For framing steel 33 mil or thicker.
Specifications
Application:Metal to Metal
Bit Tip:X-Drive
Coating:GrabberGard® Gray
Gauge:10
Head Type:Reduced Modified Truss Head
- Grabber’s X-Drive™ is a precision recess providing for a consistent, reliable performance and is less likely to wobble or strip-out.
- Under head serrations lock tight in metal to metal applications.
- GrabberGard® exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – Size #10 - #12, up to 2,500 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving my result in fastener failure or strip out of the work surface.
- Framing steel 33 mil or thicker.
- 4 underhead serrations
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- For framing steel 33 mil or thicker.
Specifications
Application:Metal to MetalBit Tip:X-DriveCoating:GrabberGard® GrayGauge:10Head Type:Reduced Modified Truss HeadLength:3/4-inPackage Type:BulkPoint Type:Drill PointThread Type:Fine ThreadAmount:8000