10 x 3/4-in X-Drive, Reduced Modified Truss Head, Fine Thread, Drill Point, Yellow Zinc Screws (Bulk)
Item Number: FP101875XDC35
For framing steel 33 mil or thicker.
For framing steel 33 mil or thicker.
Specifications
Application:Metal to Metal
Bit Tip:X-Drive
Coating:GrabberGard® Green
Gauge:10
Head Type:Reduced Modified Truss Head
- Grabber’s X-Drive™ is a precision recess providing for a consistent, reliable performance and is less likely to wobble or strip-out.
- Under head serrations lock tight in metal to metal applications.
- Grabber reduced modified truss head screws begin with the best available materials and conform to strict manufacturing requirements in thread forming. This means the screws will drive faster and will hold better.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
-
- Use a standard screw gun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – Size #10 - #12, up to 2,500 RPM.
- The head is fully seated when the bearing surface of the head is flush with the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving my result in fastener failure or strip out of the work surface.
- Framing steel 33 mil or thicker.
- 4 underhead serrations
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
- For framing steel 33 mil or thicker.
Specifications
Application:Metal to MetalBit Tip:X-DriveCoating:GrabberGard® GreenGauge:10Head Type:Reduced Modified Truss HeadLength:3/4-inPackage Type:BulkPoint Type:Drill PointThread Type:Fine ThreadAmount:8000