Grabber cement board and high-density sheathing screws have been specifically designed for use with cement board and high-density exterior sheathing. These exterior grade GrabberGard® corrosion resistant fasteners have a .40” (10.5mm) wafer head with nibs to facilitate seating and minimize strip out. Grabber drill point screws are for use for the attachment of these boards to steel from 20 to 14 gauge.
Grabber cement board screws meet the USG Durock specification for minimum head diameter of 0.400”.
GrabberGard exterior grade coating
GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. The distinguishing feature of GrabberGard® is the joining and encapsulation the substrate with the fused organic surface coating. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films.
Grabber cement board and high-density sheathing screws have been specifically designed for use with cement board and high-density exterior sheathing. These exterior grade GrabberGard® corrosion resistant fasteners have a .40” (10.5mm) wafer head with nibs to facilitate seating and minimize strip out. Grabber drill point screws are for use for the attachment of these boards to steel from 20 to 14 gauge.
Grabber cement board screws meet the USG Durock specification for minimum head diameter of 0.400”.
GrabberGard exterior grade coating
GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. The distinguishing feature of GrabberGard® is the joining and encapsulation the substrate with the fused organic surface coating. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films.
Specifications
Application:Cement Board to Metal
Gauge:8
Bit Tip:Phillips Bit Tip
Head Type:Flat Wafer Head
Thread Type:Fine Thread
- Grabber’s Pro-Fit™ # 2 Phillips recess is a precision recess designed for better bit engagement resulting in less wobble or strip-out.
- Thin wafer head design provides for a larger load bearing surface and better holding power in sheathing to heavy gauge metal applications.
- GrabberGard® 1500 exterior-grade coating provides additional protection against corrosion in most exterior applications.
- Consistently formed extra sharp drill point starts and drills easily into heavy gauge metal framing.
-
- Use a standard screwgun with a depth sensitive nose piece. Suggested screwgun specification for optimal performance – Size #8 - #10, up to 2,500 RPM.
- The screw head is fully seated when the screw head is flush with the surface of the material.
- The fastener must penetrate beyond the metal three full thread pitches.
- Overdriving may result in failure of the fastener.
- Attach high density sheathing or cement board to steel 33 mil or thicker.
- All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified. The fasteners comply with ASTM C1513 performance requirements. ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.
Grabber cement board and high-density sheathing screws have been specifically designed for use with cement board and high-density exterior sheathing. These exterior grade GrabberGard® corrosion resistant fasteners have a .40” (10.5mm) wafer head with nibs to facilitate seating and minimize strip out. Grabber drill point screws are for use for the attachment of these boards to steel from 20 to 14 gauge.
Grabber cement board screws meet the USG Durock specification for minimum head diameter of 0.400”.GrabberGard exterior grade coating
GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. The distinguishing feature of GrabberGard® is the joining and encapsulation the substrate with the fused organic surface coating. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films.Specifications
Application:Cement Board to MetalGauge:8Bit Tip:Phillips Bit TipHead Type:Flat Wafer HeadThread Type:Fine ThreadPoint Type:Drill PointCoating:GrabberGard® Gray 1500 HourLength:2-1/4-inPackage Type:Mini-PackAmount:25